704-821-1402    PHONE

 

 
BORGONOVO BL94 2 ARM AUTOMATIC FINISHING STACKER

BORGONOVO BL94 2 ARM AUTOMATIC FINISHING STACKER FOR MOULDING

CODE: 1818056

$47,500.00

BORGONOVO BL 94 DUAL ARM AUTOMATIC FINISH STACKER 

This machine has been specially designed to facilitate the loading of mouldings, picture frame strips and other processed lineal parts onto drying racks. It is used in conjunction with sprayers, vacuum coaters, gesso machines, foilers and embossers. It eliminates the manual handling of workpieces which can mar the finish. It also increases productivity and efficiency compared to manual stacking. Thanks to its sturdy mechanics and patented carryover mechanism, it allows for quick and precise handling onto the drying rack with less offset or threat of pieces falling off compared to other competitors’ models which often transfer the piece three times before racking instead of just once.

 The machine can work with mouldings of the same length or of varying lengths at the same time. Loading is triggered by either a photoelectric eye and time delay or a paddle switch which both are synchronized to the lifting fingers on each arm and the variable speed conveyor belt. The number of pieces and spacing in between pieces on each rack arm can be adjusted by the operator. When the rack arm is full, the stacker automatically senses the next lower arm and begins filling the arm without interrupting the line.

When placed in non-stop cyclic line, the stacker will sound an alarm and flash a light to warn the worker that the rack is nearly full. In this way the worker can stop feeding the line until all workpieces are racked. Once the rack is replaced with an empty one, the cycle can commence again. A locking mechanism holds the rack in place relative to the stacker. A sensor signals the stacker if a rack is in place or not. When a new rack put in position, the stacker arms will automatically reposition themselves at the top and rack any workpieces left on the lifting fingers.

TECHNICAL DATA:


Overall Height 2200 mm (87 inches)
Overall Width 2300 mm (91 inches)
Overall Length 3400 mm (134 inches)
Approx. Net Weight 1000 Kg (2200 pounds)
Number Of Arms 2
Stacking Capacity 20-30 pieces per minute
Min. Working Piece Length 1800 mm (72 inches)
Max Working Piece Length 3000 mm (118 inches)
Min. Working Piece Width 20 mm (0.75 inches)
Max Working Piece Width 150 mm (6.00 inches)
Work Height At Infeed 860 mm (34 inches)

 POWER:

 Total Installed Power 2kw

 Requirements 230v or 460v-60hz-3ph 

ONE RACK INCLUDED. ADDITIONAL RACKS: $1,400.00 ea.

 

BORGONOVO
BL 94
Demo Unit
Midwest
230/460v, 60cy, 3ph
Factory Demo

Dimensions

(?)
LxWxH 87 x 91 x 134 Inches

For additional information, leasing or freight quote: (?)

Paul Rhoades
paul@machineking.com
(704) 745-7874
704-821-1402    PHONE

Type the characters you see in the picture below.

None
Loading...