704-821-1402    PHONE


automatic flat line sprayer is equipped with one (1) reciprocator, oodworking machinery, machines, repossessed
  • automatic flat line sprayer is equipped with one (1) reciprocator, oodworking machinery, machines, repossessed

FALCIONI ( MONOSPRAY 700 ) 27" Reciprocating Spray Machine

CODE: 1818051


Total length                            6840 mm (270")
Maximum width                     3050 mm (120")
Maximum height                    3198 mm (126")
Maximum Working width      700 mm (27")
Exhaust Duct (inside dim)    507 x 361 mm (20” x 14.2”)
Working Table Height           35”-37”


This automatic flat line sprayer is equipped with one (1) reciprocator in the center of the spray booth for spraying coatings, stains, base coats and topcoats on flat or contoured panels.


Frame structure in welded and enameled steel

One (1) reciprocating arm in center of booth complete with spray gun holders with electronic speed control

Reciprocating arm runs on special guides with high precision and hardwearing shoes.  Central extraction area completely free span.One (1) independent paint feed circuits. Each circuit for 4 spray guns with 4 explosion proof electro valves (spray guns not included). Only one circuit can operate at a time.

Spray gun atomizing air and paint line feed tube movements inside of reciprocator, shielded from spray zone

Internal surfaces of booth made in smooth painted panels shaped in order to avoid, as much as possible, collecting spray dust and for easy cleaning

One (1) hinged inspection door at the side of the booth

Two (2) explosion proof lights for booth lighting

Transport by use of a mylar belt with a belt cleaner. 

 Maximum transport speed of 20 feet per minute.

Spray triggered by a photoeye circuit and electronic delay. Light Bar to read width of workpiece and programming of gun timing


Separate from machine and complete with all control and safety devices

PLC interface to control spray width settings, tracks piece count and square footage.

Spraying configuration control of arm stroke and of all its accelerations and decelerations to guarantee constant arm speed in the spraying zone

Total installed capacity:                                            7.5 Kw  (10 Hp)

Power supply:                                                         220-230 V,   60 Hz,   3 phase

 Motors, fans, lights, and couplings:                            IP55 standard



 Air extraction ducting with dry pre-filters inside the spray booth and dry filters inside the filter cabinet

Electric extractor fan with electronic regulation (2 hp 20” diam. fan)

 Forced air supply into spray cabinet by 2 – 0.5 hp fans ensures positive pressure in booth to eliminate contaminants.



Total length 6840 mm (270")
Maximum width 3050 mm (120")
Maximum height 3198 mm (126")
Maximum Working width 700 mm (27")
Exhaust Duct (inside dim) 507 x 361 mm (20” x 14.2”)
Working Table Height 35”-37”


Cleaned and Tested
220v, 60cy, 3ph


LxWxH 270 X 120 X 126 Inches

For additional information, leasing or freight quote: (?)

Paul Rhoades
(704) 745-7874
704-821-1402    PHONE

Type the characters you see in the picture below.