704-821-1402    PHONE

 

 
GIBEN Rear Load, Model Y-3000 Panel Saw
  • GIBEN Rear Load, Model Y-3000 Panel Saw

GIBEN Y-3000 SPT/MR REAR LOAD PANEL SAW | USED

CODE: 3497

$39,900.00

GIBEN Y-3000 SPT/MR REAR LOAD PANEL SAW | USED

 

3800mm (149.5") cut line

115mm (4.5") blade projection

25HP main motor

3.5HP scoring motor

430mm (17") main blade

Automatic saw blade height adjustment according to book height being cut

215mm (8.5") scoring blade

Remote scoring adjustment from the G-Drive controller

Saw carriage advance 5 to 170m/m (16 to 558ft/min)  and  return at 170m/m (558ft/min)

Double independent automatic pre-positioning side aligner to 2,200mm (86.5")

AC Brushless pusher drive on precision rack and pinion

Speed;  by program at 1 - 90m/m (3' to 295'f/min)  Advance and Return

Unique PM gripper system with the following features.

              Grippers move side to side on the X axis to always position the grippers in the required position for processing any width of component from the lift table or during the cutting cycle

                            1 gripper with both X and Y movement to allow the possibility to cut different dimensions in the same pass

                        Each gripper is double width to allow clamping of 1 or 2 strips simultaneously

            1 "X" and 1 "XY" fully floating grippers open to 117mm (4.6")

            Positioning in "X" direction at 30m/m (98ft/min)

            Positioning in "Y" direction at 20m/m (66ft/min)

MR option for head cut panel rotation behind the cut line

Full length double pressure beam

Rapid blade change without need of tools

Automatic blade height adjustment by book height

Laser light at the cut-line with centering cut option

Transparent base covers

 

4 fixed air tables 2000mm X 510mm (78.5" X 20")

            1 melamine sliding shelf 510mm X 510mm between the first 2 tables fence side

 

Remote scoring adjustment from control panel

Lift table 3800mm X 1600mm (149" X 63") with transport by motorized pods

Double speed (1.4m/m) lift table raising and lowering

Powered side in-feed and out-feed conveyor with bunk stops

Raising blocks to raise the machine 220mm (8.6") to allow loading of bunks up to 800mm (31.5")

2 disappearing front aligners for alignment of books coming from the lift table

Label printing 

Can be networked to receive data from office

 

GIBEN
Y-3000 SPT/MR
As Taken From Service
2004
Northeast
460v, 60cy, 3ph
Storage

For additional information, leasing or freight quote: (?)

Kurt Nansen - (704) 821-1402 x 100
kurt@machineking.com or sales@machineking.com
(704) 821-1402
704-821-1402    PHONE

Type the characters you see in the picture below.

None
Loading...