704-821-1402    PHONE

 

 

KUPER K200-00925 VENEER SPLICER FL-INNOVATION II 1000

CODE: 8092

[Contact us for a price]

For the longitudinal joining of flat veneers from
about 0.4 to 1.5* mm thickness.

Specially developed for the joining of veneers
which are exposed to high temperatures and tensions
during the further processing (e.g. wrapping or
membrane-press technology). These veneers are
spliced with urea-glues applied to the edges. This
glue-application can be done with the pre-glueing
machine KUPER KLM or with the preglueing device
integrated in the FL/INNOVATION II.

Specific features

* integrated glue-application, ready to be connected
to the water-cooling device RACK 1100
* solid steelbase construction
* resistant PUR paint
* start-stop function via light-sensor
* disc-drive infeed
* direct-drive plastic chains transport
* patented slide rail system
* extremely narrow, individually powered heating zone
* clearly arranged operating panel for control of all main
operating elements


Technical Data

Throat depth 1000 mm
Veneer thickness approx. 0.4 to 1.5*mm
(*=other thickness on request)
Veneer length from approx. 350 mm
Veneer strip width from approx. 45 mm
Feed speed approx. 20 - 55 m/min
Length of heating zone 1200 mm
Operating voltage 400 V 50 cycl 3 Ph.
Total connected load approx. 9 KVA
Average power consumption approx. 5 KW
Air consumption approx. 5 NL / 6 bar
Floor space 2270 x 1870 x 1470 mm

Standard accessories

KUPER
K200-00925 VENEER SPLICER FL-INNOVATION II 1000
GOOD
Southeast

For additional information, leasing or freight quote: (?)

Randall Russell - (704) 821-1402
randall@machineking.com or sales@machineking.com
(704) 821-1402
704-821-1402    PHONE

Type the characters you see in the picture below.

None
Loading...