704-821-1402    PHONE

 

 
RFS Protech Curve wood press
  • RFS Protech Curve wood press

RFS PROTECH PT- 7 RADIUS FORMER | USED

CODE: 3387

$25,000.00

 

RFS PROTECH   PT 7   RADIUS FORMER | USED

 

Eliminates The Use of Forms For Laminating Radiused Components

Pro-Tech Radius formers are the modern way to fabricate curved laminates such as arched headers and radiused moldings for windows and doors. Utilizing our patented technology we eliminate the traditional method of building and storing wooden forms. The PT-7 Radius Former uses a series of machined tails supporting dual sets of aluminum arms, which are adjusted to define the pattern to be fabricated.

The provided computer program is used to determine the PT-7 setup parameters. The software leads the user through a series of questions such as type of shape, diameter, spring back, etc. that geometrically define the pattern. The software then calculates the exact location for each of the  aluminum form arms and generates a printout that is used by the operator to quickly setup the machine and fabricate a component without forms of any kind.

The laminates are clamped to the form arms with a series of 32 specially designed Pneumatic clamps. Standard compressed air, at pressures up to 150 psi, is connected to the clamp via a quick disconnect. The clamp is then energized using a self contained valve which permits the air supply to be disconnected after actuation.

The PT-7 can be used as a cold press or equipped with an optional set of thermostatically controlled heat bands. Depending on the size of the component and adhesive used., the heat bands can cure the assembly in as little as 20 minutes.

 

RFS PORTECH
PT-7
As Taken From Service
2002
Northeast
Storage

For additional information, leasing or freight quote: (?)

Kurt Nansen - (704) 821-1402 x 100
kurt@machineking.com or sales@machineking.com
(704) 821-1402
704-821-1402    PHONE

Type the characters you see in the picture below.

None
Loading...