704-821-1402    PHONE

 

 

STAR "V" SLG-2-LB LINEAR V-GROOVER

CODE: 3106

$38,500.00

2006 STAR "V" SLG-2-LB LINEAR V-GROOVER

 

(2) Spindles with 12 HP-3,600 RPM motors each, 14" throat capacity 30 mm spindle x 3" clamping length with 8mm single keyway, 9-1/2" max. diameter cutter head, ¼" to 1-1/8" material thickness, board width from 6" min. to no max. width restrictions, min. board length approx. 12", unlimited length of part when cross grooving with optional omni-directional roller ball table, 6" diameter solid aluminum reference roller in cutting area.

First grooving head is mounted in front of the heavy duty, precision machined overhead beam of 8" x 12" x ½" thick, heat-treated steel, second head is mounted in the back of the beam, pneumatically controlled head controls allow for rapid vertical head positioning when using (2) different cutter profiles, head side movement via hand crank on linear rail & bearings on precision machined beam and ACME thread screw with 0.001" accuracy, digital readout scale and pneumatic lock of head positioning, head height adjustment on linear rail & bearings, manual fine tuning via ACME screw with dial indicator gauge with 0" backlash.

DC high ratio gear drive unit for variable feed rate from 0 - 40 FPM, double width feeder belt moves work piece on high precision, stainless steel rollers, raising & lowering of feeder mechanism for optimum friction via manual gear drive. Machine base equipped with anti-vibration, anti-noise leveling pads.

Complete with: Fixed fence, cleaning brush, cutter guard and emergency shut-off line along the machine bed, automatic tape applicator with 14" tape diameter capacity and all controls. Dust collection requirements 700 CFM (1,400 CFM with both heads running), 3" diameter dust chute on cutter guard, compressed air requirements 80 PSI.

Additional upgrade options on the machine are:

Stainless steel rollers,

Automatic motor brake, automatic tape applicator side movement, linear footage counter, end of tape warning indicator

(2) 10 infeed & outfeed tables

10' Omni-directional roller ball table for cross cuts

(5) 90 degree v-groove cutters

(2) 1/2" cove back splash cutters


 

All specifications are subject to verification

Pre-owned STAR "V" Linear V-GROOVER

Star "V"
SLG-2-LB
As Taken From Service
2006
Southeast
220v, 60cy, 3ph
Storage

Dimensions

(?)
LxWxH 120 x 48 x 60 Inches
2500 Pounds

For additional information, leasing or freight quote: (?)

Kurt Nansen - (704) 821-1402 x 100
kurt@machineking.com or sales@machineking.com
(704) 821-1402
704-821-1402    PHONE

Type the characters you see in the picture below.

Loading...