704-821-1402    PHONE

 

 
VACUUM COATER SINGLE CHAMBER FRONT VIEW
  • VACUUM COATER SINGLE CHAMBER FRONT VIEW
  • VACUUM COATER 1 Chamber

VACUUM COATER SINGLE CHAMBER

CODE: 1823052

$23,550.00

VACUUM COATER 1 Chamber 

 

This Vacuum Coater is designed specifically for the application Coatings on Wood, Metal, and other substrates that have a

uniform cross section. The coating is applied to all or selected surfaces at the same time while passing through the application

chamber at 100% transfer efficiency. The coating thickness applied is controlled through vacuum pressure, line speed and

tolerance of the profile gate opening. Operator controls are kept to a minimum and located in a convenient cabinet for ease of

operation. Includes Tempco in-line heater.

 

- Construction Stainless Steel
- Pass Line Height (+/- 1" adjustment) 36"
- Reservoir Capacity (maximum) 15 Gallons
- Reservoir Capacity (minimum) 5 Gallons
- Operating Line Speeds Up To 200 FPM
- Substrate Width (maximum) 10”
- Substrate Height (maximum) 2"
- Substrate Length (minimum) 18"
- Substrate Girth (maximum) 24”
- Acoustic Level 86 dBA
- Vacuum Producers 7.5hp .
- Fluid Filters (2) integrated
- Air Requirements 10 cfm @ 100 psi
- All Fittings and Pump Parts
- Standard Diaphragm Pump Integrated
- Fluid Heaters Optional
- E1ectrical Requirements: 460V, 3 phase. 60Hz 60 Amp Maximum
(other voltages available)
- Shipping Weight (approx.) 1200 lbs
- Approximate dimensions 6' x 4' x 5' (LxWxH)

Cleaned and Tested
Midwest
Storage

Dimensions

(?)
LxWxH 72 x 48 x 60 Inches
1200 Pounds

For additional information, leasing or freight quote: (?)

Paul Rhoades
paul@machineking.com
(704) 745-7874
704-821-1402    PHONE

Type the characters you see in the picture below.

None
Loading...